Products

Beiben 1929 potable water bowser export Honduras

Honduras 10000Liters drinking water truck Beiben 1929

Potable water trucks are special designed and produced for drinking water collection, storage, transportation, and distribution. Honduras customer purchased Beiben 1929 water bowser with tanker body based on international Stainless Steel 316 material, equipped with independent HONDA generator and water pump, then can guarantee safety transportaiton and distribution of potable water, also meet the highest standards of hygiene, safety and regulatory compliance. The rear and side mounted water discharge valves can be operated separately, then guarantee water distribution more efficiently.

Work capacity:
10000Liters / 2600Gallons
Dimension ( mm ):
8310×2500×3200 mm
Wheelbase ( mm ):
4800 mm
Engine power:
290HP
Engine type:
WP10.290E32
Axle drive:
4x2, LHD
Gear box:
FAST 9-shift manual transmission
Remarks:
Food grade Stainless Steel 304-2B or SS316 for drinking water distribution

Inquiry now

Middle American Honduras clients purchased BEIBEN 1929 10000Liters potable water tanker truck is produced based on type Ⅱ Mercedes Benz BEIBEN 1929 truck chassis. which also named as Beiben potable water truck, Beiben water transport truck, Beiben drinking water pump truck, Beiben Drinking water bowser, etc. Which classical NG80B short cabin without sleeper, AC and MP3 player for convenient driving. Installed with Top 1 Chinese brand WEICHAI diesel engine WP10.290E32 with 290HP and emission 9726ml, EURO 3 exhaust standard and not choose fuel standard. Full welding round shape tanker body with reinforce clamp, all based on SS316 material, matched with independent gasoline type water pump with model QGZ80-39.6-15.8A, efficiently flow rate 39.6m3/h, power 3.05kW with speed 3600rpm. efficiently distance 15.8m. Very suitable for potable water pump in and pump out process, and service for water distribution in Honduras.

Beiben 10000L drinkable water bowser export Honduras

Efficiently Capacity

Engine / Gearbox Model

Tanker Material

Superstructure

10000Liters

WP10.290E32/ 290HP

FAST 9 shift / 9F & 1R

Stainless Steel 316

Suitable for drinking water storage and transportation

★ 10CBM potable water tanker body kit

★ Independent water pump: QGZ80-39.6-15.8A

★ Climbing ladder and top safety fence

★ 2026 year brand new

*Beiben 1929 290HP Potable Water Tanker Truck

Beiben 10m3 Drinking Water Bowser*

-----------------------------------------------------------------

CEEC factory is professional manufacturer in truck area,
guarantee all products Brand-New and High-Quality.

Beiben 1929 drinking water bowser 10000L

Name	Beiben 1929 Potable Water Truck
Cabin	NG80B, optional color and painting
Driving	LHD / RHD, 4x2 / 4x4 offroad
Engine	WP10.290E32 diesel engine, 290HP and emission can be 9726cc
Tranmission	FAST 9 shift manual type, 9F & 1R
Wheelbase	4800 mm
Tire	12.00R20, 6+1 units

Beiben 10000liters drinking water bowser

Capacity	10cbm drinking water tanker
Tanker Material	Stainless Steel SS316 material, thickness 5mm
Water Pump	Top Chinese brand potable water pump with model QGZ80-39.6-15.8A Flow rate: 39.6m3/h Distance: 15.8m Rotation Speed: 3600rpm Working Power: 3.05kW Self Suction Height: 5m Fuel Consumption: 850 g/kw·h
Hose Reel	Customized on two sides storage box, length depend on tanker body
Painting	100% customized painting and logos

✦ Product Introduction of ISUZU 6HK1 Water Truck « « «

Manufacturer: CEEC Trucks Group

Features:

1. Truck Chassis: Beiben 1929 truck chassis, LHD / RHD, 4x2, 4X4 model optional, GVW 19000kg

WP10.290E32 diesel engine 290HP, emission 9726ml

FAST 9 shift manual transmission gearbox, 9 forward

2. Tanker Body Kit: Full welding round shape, SS316 stainless steel
Efficiently Water Tanker volume 10000Liters equal to 2600gallons

Suitable for drinking water storage and distribution, safety and convenient for usage

3. Water Pump: Famous Chinese brand water pump with model QGZ80-39.6-15.8A

Efficiently flowrate 39.6m3/h, efficiently and durable

✦ Product Parameter of ISUZU 12cbm water pump fire truck « « «

Detailed specifications For Beiben 10000liters Potable water Transport Truck
Chassis parameters
Vehicle Model No.		CEEC5182GSS
Truck Model	Beiben	1929 truck chassis with NG80B long cabin
Whole vehicle main dimensions	Overall dimensions (LxWxH)mm	8310×2500×3200
	Drive Type	4×2
	Wheel Base(mm)	4600
Weight data	Tare Weight(kg)	8600
	Capacity(kg)	10866
	Persons in cab	3
	Total weight(kg)	19000
Whole vehicle main performance	Max.driving speed(km/h)	89
Whole vehicle main performance	Max.climbing degree(%)	38
Engine	Model	WP10.290E32
	Displacement(L)	9.726
	Rated Power(kw/rpm)	213/290(2200)
	Max torque(N.m/rpm)	1160(1200-1600)
Gearbox	Model No.	FAST 9 shift
Clutch	Type	Reinforced diaphragm clutch
Rear Axle	Type/Mainreducetion ratio	13T
Suspension	Front suspension/Leaf spring number	9
Suspension	Rear suspension/Leaf spring number	9+6
Steering Gear		ZF8098
Brake system	Service brake	dual circuit compressed air brake
	Parking brake	spring energy, compressed air operating on rear wheels
	Auxiliary brake	engine exhaust valve brake
Wheels and tyre size		6+1/12.00R20
Fuel Tank(L)		400
Cabin		Manual, cab lift, airbag seat, manual rearview mirror glass lifter, air conditioner
Upload parameters
A.TANK BARREL
1. Tank Profile	Round shape
2. Test pressure	Hydrostatic test to5 psi (35 Kpa) on each compartment.
2. Test pressure	Hydrostatic test to5 psi (35 Kpa) on each compartment.
3. Working pressure	Atmospheric.
4. Capacity	10000L plus 3~5% ullage.
5. Compartments	Single compartment.
6. Interior weld finish	Not polished or grinded (W-0).
7. Exterior weld finish	Not polished or grinded (W-0).
8. Shell material	Stainless steel 304 2B.
a) Top	3.7mm nominal.
b) Sides	3.7mm nominal.
c) Bottom	3.7mm nominal.
9. End Plate	Stainless steel 304 2B, 3.7mm nominal.
9. End Plate	All single heads dished and flanged.
10. Bulkhead	Nil.
11. Baffle / Surge Heads	Stainless steel 304 2B, 3.7mm nominal.
	Dished with flap.
	2 pcs
12. Spill molding and rollover protection	Stainless steel around the dome with drain hose.
13. Spill molding lids	Nil.
14. Outer rings	304-2B stainless steel, 60mm height, 3mm nominal, continuously welded.
14. Outer rings
15. Frame	Carbon steel independent.
16. Loaders and brackets	Carbon steel.
16. Loaders and brackets	Carbon steel.
15. Isolation	Nil.
16. Exterior lining	Nil.
B. TANK FITTINGS AND PIPING
B. TANK FITTINGS AND PIPING
1. Manholes	20" diameter with 6 stainless steel wing nuts, located at the top center
2. Pressure Vacuum Vent	Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum.
2. Pressure Vacuum Vent	Chinese Brand
3.Foot valve	Nil.
4 Discharge system	3” diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank.
4 Discharge system
5. Piping	Nil.
6. Thermometer	Nil.
7. Steam trace	Nil.
8. Overfill Prevention	Nil.
9. Tow Hook	Nil.
10. Product Indicators	Nil.
10. Product Indicators	Nil.
C. ACCESSORIES
1. Ladder	Stainless steel, 400mm wide, with nonskid rungs and lateral handles, mounted at right middle of tanker.
2. Walkway	Extruded aluminum around dome.
3. Hose Carries	1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236") hose close type complete with brackets to be installed at the right side.
4. Hose	Firemen type flexible discharge hoses, 30m 2.5" for discharge. and flexible plastics suction hoses, 5.9m 3"for suction, 3" female camlock coupling at both ends.
5. Motor Pump	BRIGGS & STRATTON Gasoline motor, 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg.
6. Toolbox	Nil.
7. Rear Bumper	Aluminum member to accommodate light assembly and number plate to cover full width of the tank.
7. Rear Bumper	Steel bumper with ground clearance 500mm approx.
8. Hazchem Plate	Nil.
9. Mudguard	Aluminum over suspension and the upper coupler.
9. Mudguard	Mud flaps rigid plastic at the rear.
10. Lights & Wiring	24V. ISO 1185 7 pin socket.
	Harness: oil and vapor proof cable.
	Front: nil.
	Side:
	Mark lamp 3Pcs/side, LED.
	Reflector 3Pcs/side
	Turning lamp 1Pcs/side, LED.
	Rear Bump:
	Reverse lamp R-L 2Pcs, LED.
	Turning lamp R-L 2Pcs, LED.
	Brake lamp R-L 2Pcs, LED.
	Register plate light
	Rear top: nil.
	Brand of Wiring:
11. Reverse alarm	Nil.
12. Connector Box	At the center in the front dished
13. Sticker	50mm wide red-white reflective sticker, mounted at both sides and rear bump.
14. Hand rail	Nil.
15. Fire Extinguisher	8kg, 2Pcs.
15. Fire Extinguisher	Carbon steel extinguisher holder located on the landing gear on the curb side.
16. Drains hose	water drains hose 2", installed at the back of spill molding
16. Drains hose
17. Wheel chocks	Nil.
18. Traffic cone	Nil.
19. Spare wheel bracket	1set
19. Spare wheel bracket	Carbon steel, basket type, located behind the landing gear.
20. Painting	Polyurethane medium Aluminum gray, applied over epoxy primer on carbon steel elements

Beiben 10000Liters drinking water bowser truck

✦How to produce BEIBEN Drinking Water Truck« « «

BEIBEN 1929 medium duty 4x2 Potable Water Tanker truck is designed with gross vehicle weight over 19000kg, fully relay on the Mercedes Bbenz technology truck technology, equipped with 6 cylinder WP10.290E32 diesel engine, with efficiently horse power can be 290HP and exhaust emission 9.726Liters, matched working with FAST 9 shift manual gearbox 9JS150T, convenient and safety for driving, and very lower fuel consumption with 18% saved. Fully SS316 water tanker kit with capacity 10000Liters, equiipped with QGZ80-39.6-15.8A water pump, with efficiently flow rate 39.6m3 per hour. Which is designed and used for drinking water storage and distribution. With efficiently pump in and pump out function. Efficiently used for multiple type liquid storage and delivery, including fresh goat milk, fresh cow milk, fresh fruit juice, edible oil, bulk beer, potable water, etc. Also can be widely used in Caribbean, Middle American and South American countries, including Honduras, Belize, Salvador, Nicaragua, Guyana, Surinam, Peru, Haiti, Dominica, St Martin, Trinidad and Tobago, etc.

How to design and produce BEIBEN Potable Water Bowser

⇓

SS316 material for potable water tanker

316 Stainless Steel Plates in Hot Rolled and Cold Rolled with Surface Finish Like Mill Finish, fully welding type and can efficiently avoid rust, also for long life service, service for drinking water storage and transportation.

QGZ80-39.6-15.8A gasoline water pump

Model	QGZ80-39.6-15.8A
Power	3.05kW
Speed	3600r/min
Self Suction Time	≤ 150s
Flow Rate	39.6m3/h
Distance	15.8m
Comsumption	850g/(kw·h)
Self Suction Height	5m
Self Weight	27kg
Standard	Q/HPPF 1

✦ North Benz Drinking Water Truck Configuration« « «

Beiben 1929 truck NG80B cabin
10000Liters Portable Water tanker body kit
Rear view of Beiben potable water bowser

QGZ80-39.6-15.8A water pump
Rear discharge Valve
Rear water spraying nozzle

North Benz 10000Liters portable water truck

★ Mercedes Benz technology super diesel engine 290HP, fuel consumption save 18%

★ FAST Manual 9 shift mechanical transmission gearbox

★ 12 months fast moving spare parts for FREE

★ Customized stainless steel 304-2B and SS316 material

★ Authorized Beiben 1929 potable water tanker truck exporter

★ Training service for BEIBEN 10000Liters drinking water bowser truck.

Beiben 10cbm potable water tanker truck

Beiben 10cbm drinking water Bowser

China professional vacuum truck supplier and exporter, we supply high quality water sprinkler tanker truck and combined sewer jetter truck. We can ensure the fast delivery time and 12 months guarantee for our water trucks. Our water bowser trucks are customized with different type vacuum pump JUROP, MORO, BP brand, and sold to more than 80 countries including Eastern Europe and CIS countries, Africa, Southeast Asia, Central and South America, Middle East, etc.

Products--100% Customized Level One!

Transportation--100% Safety, Convenience, Efficient!

Services--7days + 24hours Safetify Service!

1.we can do the designs according to the your requirement .

2.we can offer you the high quality & reasionalble price

3.we can offer your a reliable after-sell service

4.we have skilled professinal design team

5.promptly delivery. any order is welcome.

CEEC factory also supply spare parts (original, OEM, and replacement) for all types of trucks and trailers with discount and nice quality to ensure our customers's trucks and trailers being in good working conditions.

---- Service more than 60 countries.

---- Professional guidance on your importing documents.

---- CO, FORM E, FORM P, Pre-shipping Inspection...