Road Sweeper Truck

How to design and produce Road Sweeper Garbage Truck?

CEEC TRUCKS are original manufacturer for design and produce multiple type road sweeper trucks, we can deisgn the sweeper upper kits on different truck chassis ISUZU, HOWO, BEIBEN, FAW, SHACMAN, DONGFENG, JAC, etc. With customized auxiliary frame device to be mounted with water tanker kit and dust tanker kit, all based onn stainless steel 304 material for durable service. Equipped with 100% suitable auxiliary diesel engine, optional ISUZU, CUMMINS, YUCHAI, WEICHAI, etc, with engine power 57HP to 340HP, matched with powerful fan device for vacuum working. Each side can be allocated with 1 to 2 pcs sweeper assembly, also with vacuum suction plate, so can realize all function. To meet customer requirement, we Engineer Department can design 100% suitable 3D drawing for end user checking the components and position, also technical drawing for dimension confirm.

⇓

3D drawing for ISUZU GIGA 4X road sweeper jetting truck

I SS304 material Road sweeper trucks body

 

Integrated designed road sweeper tanker body kit, all based on stainless steel 304 material, including dust tanker, clean water tanker, matched air flue, lifting device, discharge device, seal device, etc. SS304 design with function of acid and alkali resistant, also resistant to seawater. Mainly classify as below showing:

Smaller Sweeper Truck: Dust bin 3-5cbm, Water tank 1-3cbm

Medium Sweeper Truck: Dust bin 5-7cbm, Water tank 3-5cbm

Heavy Sweeper Truck: Dust bin 7-12cbm, Water tank 5-8cbm

 

I Sweeper truck auxiliary frame assembly

 

Heavy loading designed frame assembly, which based on high strength rectangular square tube and bent steel plate, with whole sweeper tanker upper kit mounted on it, connected with damping connector and U shape bolts.  

Mainly have below components connected as showing: Dust bin, Clean water tank, Auxiliary diesel engine, Fan assembly, High pressure water pump (If have), Sweeper plate, Suction Plate, Pipeline, Maganetive valves, Control valve, etc. 

IBroom / Sweeping brushes assembly

 

Middle mounted sweeper brushes plate assembly, hydraulic extend out and retract back, customized with 2 broom device with each side one set, or with 4 broom device with each side two sets, equipped with cycloidal hydraulic motor for directly drive, support three speed regulation 50/80/110 rpm. Sweeping broom adjust angle can be forward by 4-6 degree, outward 4-7 degree, to 100% guarantee brushes touch the ground for convenient and safety working:

Sweeper broom with steel plate matched with nylon sweeper brushes, optional steel brushes for sand or rock cleaning.

 

I Powerful fan system for suction

 

The road sweeper truck equipped with fan assembly, which is the power core for the negative pressure suction, and determining the dust collection capacity. The industry standard is a high-pressure centrifugal fan, not an ordinary axial flow fan. Mainly consist of blade casing, wear resistant impeller, main shaft, bearing housing and automatic clutch assembly. Which get power from auxiliary diesel engine and offer negative pressure for dust sucked into the tanker body. 

I Rear mounted suction plate with roller

 

Middle or Rear mounted suction plate assembly with roller, which collects the accumulated garbage and sucks into the dust bin through negative pressure, that created by fan assembly. The main structure consists of single-wide suction nozzles and double suction ports. The hydraulic cylinder can easily control whole suction plate lifting up and falling down. 

Standard normal suction plate: For suction dust and debris into tanker.

Customized suction plate with roller brush inside: For deeply cleaning, efficiency increase 35%.

 

Road sweeping trucks are used for cleaning large areas of roads, streets, highways, and parking lots. These road sweeping vehicles are equipped with specialized brushes and vacuum systems that allow them to remove debris and dirt from the surface. Here are some specific uses of road sweeping trucks:

1. Street cleaning: Municipalities and local authorities use road sweepers to clean streets, alleys, roadsides, and sidewalks, removing mud, leaves, garbage, and other debris.
2. Construction sites: Road sweepers are often used at construction sites to clean up debris such as dirt, broken bricks, and small rocks.
3. Industrial sites: Heavy industrial sites such as mining and manufacturing areas often require road sweeping trucks to clean up large quantities of debris such as dust, gravel, and dirt.
4. Parking lot cleaning: Shopping centers, malls, and other commercial properties utilize road sweeping trucks to clean parking lots to maintain a clean and safe environment for customers and employees.
5. Airport runways: Airports often utilize specialized road sweeping trucks to clean runways to prevent debris from causing damage to airplanes.
6. Sporting events: Large sporting events like marathons or cycling races require road sweeping trucks to clear the road of debris and ensure the safety of the participants.

Advanced features for Street Sweeper Truck?

⇓