23FT wing van cargo truck ISUZU GIGA 4X

May 16 , 2025

Philippines Isuzu GIGA GIGA 4X Wing box is a special model designed and produced based on the Isuzu GIGA 4X truck chassis to meet the needs of efficient logistics and transportation. The 23FT wing van cargo truck ISUZU GIGA 4X core feature is the innovative flying wing cargo box design. This design uses a hydraulic system to control the wing van plate on both sides of the cargo box to expand upward to form a wing-like structure, thereby greatly improving the efficiency of loading and unloading goods. Isuzu 6 wheeler wing van truck is especially suitable for scenarios where goods need to be frequently stored and retrieved, such as express delivery and cold chain transportation, which can maximize transportation capacity and adapt to diverse logistics needs.

23FT wing van cargo truck ISUZU GIGA 4X


This model wing van cargo truck is built on the Isuzu GIGA 4X heavy-duty truck platform and inherits the high reliability and high performance genes of the GIGA series. Isuzu van truck is equipped with Japanese Isuzu technolog 4HK1-TCG60 model diesel engine with a displacement of up to 5.193 liters and a maximum power of 150KW/205HP. It is also equipped with ISUZU brand MLD 6 shift transmission with 6 forward and 1 reverse, taking into account both power output and fuel economy. At the same time, the chassis structure has been strengthened, and the bending and torsional rigidity of the longitudinal beam has been increased by about 20%. Combined with the configuration of variable-section leaf springs and reinforced rims, high load-bearing capacity is ensured. As for the upper body kit of the wing van, which have size 7000x2450x2200mm, both sides can be hydraulic lifting up and falling down as wing type, also full dropside model, as for rear doors are hinge type for convenient open and close.

23FT wing van cargo truck ISUZU GIGA 4X

 

23FT wing van cargo truck ISUZU


ISUZU GIGA 4X Wing Van Cargo Body Truck focuses on practicality and safety in detail design. The height of the cargo box can be customized according to user needs to reduce wind resistance and improve stability; the cab adopts four-point airbag suspension shock absorption and silent technology, equipped with a multi-function steering wheel, double-layer sleeper and intelligent car networking system to optimize driving experience and management efficiency. Some models also incorporate environmental protection concepts to meet the National 4/5/6 emission standards and adapt to the modification needs of special fields such as municipal administration and fire protection, demonstrating Isuzu's technical integration capabilities in the field of commercial vehicles.

 

Isuzu Wing Van truck is modified normal van truck,  which equipped with power spring, manual or hydraulic device to opening the side wing plate. It's made of iron corrugated, the side board could be turn over which is easy for side loading. The van box could be customized due to the client's requirement. Including Light Duty Wing Van Trucks engine technology is more mature, strong power and low noise. The vehicle matching science, low fuel consumption, can be fuel-efficient 10-20%. It has high attendance, high efficiency, low cost of the three major characteristics. Strengthen the full adoption of the Japanese ISUZU heavy truck chassis riveting technology, forming a frame beam, the bearing capacity of the carriage can be greatly enhanced.  According to the actual load of the  version selection.

Isuzu GIGA 4X wing van truck

 

Isuzu GIGA 4X wing van truck

 

Isuzu GIGA 4X wing van truck

 

23FT wing van cargo truck ISUZU GIGA 4X Technical Specifications
Model QL5180JQFRY  Driving type: 4x2 left hand driving
Engine Make: ISUZU GIGA 4X
Engine model:4HK1-TCG60, Euro 6 emission standard 
4-cylinder in-line with water cooled, turbo-charging and intercooler
Maximum output: 205 hp (150 kw)
Maximum torque: 647 Nm
Displacement: 5.193 L
Transmission ISUZU MLD model, 6 forwards and 1 reverse, manual
Ratio:6.833 / 4.734 / 2.783 / 1.822 / 1.307 / 1 / 0.728 / 6.327(R) 
Front Axle ISUZU, 6.3 Ton loading Capacity
Rear Axle ISUZU, 13 Ton loading capacity
Chassis Frame: U-profile parallel ladder frame and reinforced subframe
Front suspension: semi-elliptic leaf spring
Rear suspension: semi-elliptic lea spring
Carbon fuel tank: 200 L capacity with locking fuel cap, fitted to the off side of the chassis
Steering Power steering,  hydraulic steering with power assitance
Brakes Service brake: dual circuit compressed air brake
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels
ABS
Wheels & Tyres Tire: 6 pcs 295/80R22.5
Option: 12.00R20
Driver's Cab ISUZU GIGA 4X flat roof cab with air deflector, with two seats, 2 bed, A/C, electric glass, central lock
Dimensions  mm Wheel base 5550 MM
Overall length 9000 MM
Overall width 2500 MM
Overall height  3800 MM
Weight  kg Curb weight 7600 KG
Maximum Loading Capacity 10400 KG
Gross vehicle weight(GVW) 18000 KG
Front axle loading capacity 6300  KG
Rear axle loading capacity 13000 KG
Parameter of the wing body Electric Power Wing Yes
Box Material Iron Carbon Steel
Box thickness  2 mm
Demision(Length,Width,Height) 7000X2450X2200MM

 

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for About
Contact us #
+86 13647297999

Home

Products

whatsApp

contact