Moldova customer purchased 16CBM trash compactor body kits to be mounted on Gernmany MAN TGM 18.280 BB-CKD offroad 4x4 right hand drive truck chassis. Then designed as MAN 16cbm refuse garabge compactor truck, which is a type of municipal waste management vehicle, specially used to compact or compress solid waste in to a more manageable size. An integrated compactor body kit with feinforcement structure, inner with horizontal working push plate device. Rear mounted hopper device matched with slide and scraper, which working together to ensure the garabge in the right size before being compacted, and then collected into compactor body. Rear loader compactor trucks are usually outfitted with a large, sloped conveyor belt that ejects the waste from back of the MAN garbage truck. Moreover, the refuse compactor trucks are designed to load municipal solid wastes and compact the waste within the vehicle structure thus avoiding long-large travel for little wastes and transporting them to final destination of waste treatment facilities. Also the efficiently waste tanker device can be used to storage waste water during collecting and compacting, efficiently avoid second pollution.

*EURO designed 16cbm Garbage Compactor Kit

    20cubic yards Refuse Compactor Body* 

⇓

✦ Product Introduction of Rear Loader Compactor Kit « « « 

Manufacturer: CEEC Trucks Group

Features:

1. Compactor Body Kit: Full welding curve shape, T420 steel, thickness for side 4mm and floor 5mm

2. Control System: Electric control system: Germany Siemens PLC electricl control box to realise all function

                                 Hydraulic control system: CE certify hydraulic valve for multiple control

3. Rear Tilting Device: EURO design rear hopper device suitable for multiple garbage bins, available for 240L, 360L, 660L, 1100L. 

Designed to be mounted on MAN truck chassis

Truck chassis: MAN TGM 18.280

Engine: D0836LFL41 model, 280HP / 206kw

Tranmission: AUTO gearbox TipMatic 1212 OD

Steering: Right Hand Drive

Driving: 4x4 offroad with spring suspension

Wheelbase: 4500mm

Tire: 14.00R20 / 395/85R20, single 4 tires

Capacity	16 cubic meters / 20 cubic yards
Body Material	T420 material, thickness for side 4mm and floor 5mm
Control	(Cabin and rear hopper mounted) CAN BUS electric control  Hydraulic valve control
Component	Push Plate with 1 cylinder Scraper with 2 cylinders Slide Plate with 2 cylinders Rear Hopper with 2 cylinders Tilting Device with 2 cylinders
Painting	100% customized painting and logos

 

CEEC TRUCKS garbage compactor kit 3D drawing

Specialized EURO design type rear hopper device, based on strength steel T420 material, stronger and thickness over 5mm, matched with Slide Plate assembly and Scraper assembly, matched working with hydraulic cylinder for garbage collection and compression. And to be mounted on MAN truck chassis.

 

 

✦ Advanced Features for Refuse Compactor Superstructure « « «

 

Newly EURO model refuse compactor rear loader superstructure is designed and mounted on customer locally MAN TGM 18.280 truck chassis, used for solid waste garbage collection, compression and transportation etc. With service for community, factory, supermarket, mall, school, airport, etc. Widely used in Caribbean, Middle American and South American countries, including Honduras, Belize, Salvador, Nicaragua, Guyana, Surinam, Peru, Haiti, Dominica, St Martin, Trinidad and Tobago, etc.. Below are advanced features for checking:

 

★ All Structural made of High Strength Steel T420 material

★ CAN-BUS electric control and Hydraulic control for easy operation

★ Matched with ISO9001, ISO14001 and CCC quality

★ Optional rear loading device for garbage loading 240L / 1100L

★ Customized whole EURO design type compactor body kit

★ Suitable for MAN 4x4 offroad truck chassis

• 

  Push Plate and Hydraulic cylinder
• 

  T420 material compactor body kit
• 

  Rear hopper assembly

• 

  Slide plate device
• 

  Scraper device
• 

  Rear titing device for 240L, 660L and 1100L bins

• 

  In cabin control box
• 

  Side mounted control valve
• 

  Swing arm stabilizer for safety support

• 

  Hydraulic control valve
• 

  Container loading absorb
• 

  Rear mounted foot padel

 

✦ Why to buy Rear Loader Compactor Kit only « « «

 

CEEC TRUCKS produced garbage compactor upper body kits are 100% customized and designed based on clients local truck chassis, can efficiently get power from local truck chassis engine and transmission gearbox, the designed compactor body superstructure body kit capacity can be 3cbm minimum to 35cbm maximum, matched with CAN BUS electric and Hydraulic valve for safety and convenient daily usage, and the hydraulic cotnrol valves can be customized installed at rear hopper for daily usage. Moreover, customized rear tilting device also customized with standard international standard bin lifting device and swing arm device for bigger steel bins. Garbage compactor body kits can be export to any country all over the world, without the limit of certificate requirement. And customized for different kind of truck chssis: ISUZU, MAN, Mercedes Benz, etc.

After refuse garbage compactor body kits well finished, we will mounted on truck chassis for all function testing and inspection, details performance parameters as below showing:

Effective volume of the garbage bin (m³) ≥ 16

Volume of the sewage tank (m³) ≥ 0.85

Volume of the filling hopper (m³) ≥ 1.8

Time for one filling cycle (s) ≤ 25

Lifting time of the filling device (s) ≤ 15

Discharging cycle time (s) ≤ 110

Cycle time of the feeding mechanism (s) ≤ 10

Type of the bucket flipping mechanism 2 × 240L plastic buckets + skip bin lifter

Pneumatic sealing cover

Height from the filling device to the ground (mm) ≥ 1000

Hydraulic system pressure (MPa) ≥ 18