European customer GreenLux purchased 16CBM garbage compactor upper body kits will shipped to South American Peru, and mounted on local ISUZU FTR34 truck chassis. All these newly designed waste collector packers are produceds based on GREENLUX clients requirement, initially CEEC TRUCKS Engineer Department will throughly checking all customer requirement, then prepare official drawing based on requirement, finally start production process. 100% customized 20cubic yards packer body kits reduces the volume of residential or industrial waste loaded into the container using compression and a rotating scraper plate to push waste from the hopper into the container. It then employs an push plate ejector device to discharge the load. Packer trucks are capable of handling oversized and small-volume waste with equal ease making them suitable for both household as well as industrial waste disposal.

Newly designed EURO model 16cbm Garbage Compactor Kit with Rear Hopper asssembly equipped with standard rear tilting device for multiple type international standard garbage bins, including 120L, 240L, 360L, 660L and 1100L, etc. Also specialized installed with stronger swing arm device, matched working with chain system and two sets hydraulic stabilizers supporter, efficientlly and safety designed for loading 1cbm, 1.5cbm, 2cbm, 2.5cbm steel skip loader bins. Customized 16cbm capacity solid waste compactor body kits matched with efficiently control system, which are designed for local truck chassis, available for multiple type chassis: ISUZU Mercedes Benz, Toyota, MAN, VOLVO, ISUZU, HINO, UD, Toyota, Mitsubishi, Nissan, Hyundai, KIA, FORD, HOWO, SHACMAN, FAW, etc.

*16cbm Waste Mangement Garbage Compactor Kit

    20cubic yards Rear Loader Body* 

CEEC factory is professional manufacturer in truck area,
guarantee all products Brand-New and High-Quality.

⇓

✔ Product Introduction:  

Efficiently designed 16cbm stronger compactor upper body kit, equal to 20 cubic yards, based on T420 material, thickness for compactor body side 4mm and floor 5mm, equipped with top quality Germany technology CAN-BUS electric control system inside cabin and rear hopper, also mounted with CE certify Hydraulic Control valves in the front of compactor body kit and rear hopper, automatic acceleration system, also can be customized with wireless remote control box, all to guarantee the operation and working more smoothly and efficiently. And truck with below advanced features:

• Press packer truck is suitable for large scale waste collection
• Enhanced convenience with installation of a packer operating switch (Auto CAN BUS) and discharging switch inside the cab and rear hopper.
• Possible to use emergency button under dangerous situation
• PTO installed for MZW6P transmission, and must be specified when ordering press pack vehicles

Capacity	16 cubic meters / 20 cubic yards
Body Material	T420 material, thickness for side 4mm and floor 5mm
Control	(Cabin and rear hopper mounted) CAN BUS electric control  Hydraulic valve control
Component	Push Plate with 1 cylinder Scraper with 2 cylinders Slide Plate with 2 cylinders Rear Hopper with 2 cylinders Tilting Device with 2 cylinders
Painting	100% customized painting and logos

 

 

Rear Hopper Device

Specialized EURO design type rear hopper device, based on strength steel T420 material, stronger and thickness over 5mm, matched with Slide Plate assembly and Scraper assembly, matched working with hydraulic cylinder for garbage collection and compression. 

Garbage Loading device including as below:

Rear Tilting device for 120L, 240L, 360L, 660L, 770L, 1100L and 1200L bins

Super swing arm device for bigger steel garbage containers, standard 1cbm, 1.5cbm, 2cbm, 2.5cbm, etc.

 

✔ Garbage Compactor Kit Manufacture PROCESS:  

 

CEEC TRUCKS produced garbage compactor upper body kits are 100% customized and designed based on clients local truck chassis, can efficiently get power from local truck chassis engine and transmission gearbox, the designed compactor body superstructure body kit capacity can be 3cbm minimum to 35cbm maximum, matched with CAN BUS electric and Hydraulic valve for safety and convenient daily usage, and the hydraulic cotnrol valves can be customized installed at rear hopper for daily usage. Moreover, customized rear tilting device also customized with standard international standard bin lifting device and swing arm device for bigger steel bins. Below steps showing how to produce the Garbage compactor kits:

 

CEEC TRUCKS factory R&D Department design the drawing based on requirement

⇓

• 

  16CBM garbage compactor truck design drawing
• 

  16CBM garbage compactor body kit drawing
• 

  16CBM garbage compactor kit for 40HQ container shipment

 

Design the 3D drawing for Compactor Body / Hopper / Push Plate based on requirement

⇓

Rear hopper device 3D drawing	Push plate assembly 3D drawing

 

Prepare suitable Power Take Off (PTO) for customer ISUZU MZW6P transmission gearbox

⇓

 

PTO for MZW6P model 6 shift manual gearbox

 

Customer local ISUZU truck matched with MZW6P manul truck chassis, 6 shift transmission with speed ratio as below: 

1st 6.615
2nd 4.095
3rd 2.359
4th 1.532
5th 1.000
6th 0.722
Reverse 6.615

Matched with suitable PTO, details as below: Package weight 19.1KG, Package dimension: 32x28x28 cm

 

 

After Peru customer confirmed the designed drawing, will start production and guarantee time within 20days

Durable designed garbage compactor superstructure upper body kits are shipping to Peru and mounted on locally ISUZU truck chassis, then can be used for multiple multiple solid waste collection, compression and transportation. International advanced design for compactor body kit and rear hopper design, also learn to know customer local working condition to choose most suitable rear tilting device, so to guarantee all rear loader compactor trucks and upper body kits that from CEEC TRUCKS are reliable and succeed for profit.

⇓

 

Garbage Compactor kit export to GreenLux

 

Designed based on customer local chassis, available for both left hand driving model and right hand drive model, suitable for wheelbase range from 4500mm to 5800mm, Full hydraulic control device and Germany CAN BUS electric control device, also available to be matched with wireless remote control box, all guarantee truck working smoothly and durable.

 

• 

  Front view of waste compactor body kit
• 

  Rear hopper with tilting device and swing arm assembly
• 

  Slide Plate and Scraper

• 

  Electric control box behind compactor body
• 

  Electric control box at rear hopper
• 

  Hydraulic control valve

• 

  HOWO rear loader truck hopper assembly
• 

  Rear mounted swing arm device
• 

  Swing arm stabilizer for safety support

 

Factory testing and Preshipment inspection for all 16cbm rear loader compactor kit

After 16cbm trash compactor body kits well finished, we will mounted on truck chassis for all function testing and inspection, details performance parameters as below showing:

Effective volume of the garbage bin (m³) ≥ 16

Volume of the sewage tank (m³) ≥ 0.85

Volume of the filling hopper (m³) ≥ 1.8

Time for one filling cycle (s) ≤ 25

Lifting time of the filling device (s) ≤ 15

Discharging cycle time (s) ≤ 110

Cycle time of the feeding mechanism (s) ≤ 10

Type of the bucket flipping mechanism 2 × 240L plastic buckets + skip bin lifter

Pneumatic sealing cover

Height from the filling device to the ground (mm) ≥ 1000

Hydraulic system pressure (MPa) ≥ 18

⇓

 

• 

  16cbm rear loader body kit factory testing
• 

  Rear loader compactor body kit factory checking
• 

  20cubic yards garbage compactor kit preshipment inspection