South American clients purchased SINOTRUK HOWO 8x4 Suction and Conveying Dry Vacuum Truck is full relay on the advanced features of HOWO LHD TX heavy duty 8x4 truck chassis, equipped with WEICHAI 6 cylinder WD615.47 diesel engine, with efficiently horse power can be 371HP, matched working with HOWO HW19710 model 10 shift manual gearbox, convenient and safety for driving, and very lower fuel consumption. Standard wheelbase 1800+4600+1350mm, Gernmay MAN technolgy axles with front axle capacity 9.5tons and rear axle capacity 16tons. 12.00R20 steel tire totally 13 units including one spare tire. 

Newly designed HOWO dry vacuum truck equipped with 24000Liters 24CBM round shape vacuum tanker body kit, which is designed based on Q355 material, thickness for tanker body and two sides cover 6-8mm, inner baffle thickness 4mm. Equipped with independent Roots vacuum pump and efficiently suction flow rate can be up to 30-80 tons per minute, maximum working pressure -0.06Mpa, exhaust pressure 21mg/m3.  Therefor, the HOWO dry vacuum trucks are special designed for power plants, steel mills and coal plants. Widely used for multiple industries function, including chemical engineering, energy, coal, mining, metallurgy, etc. Specialized designed to transport dust materials from steelmaking, sintering, coking, raw materials, gas-fired llime kilns, coke powder, aluminum powder, cement, mineral powder, lime powder, limestone dust and mixed dust, etc. HOWO suction and discharge truck is a high-efficiency, safe, and environmentally friendly special vehicle for bulk material handling and transportation. 

*HOWO 12 wheeler Industrial Wet and Dry Vacuum Truck

    HOWO 24cbm Supersucker Dry Vacuum Truck* 

CEEC factory is professional manufacturer in truck area,
guarantee all products Brand-New and High-Quality.

Name	HOWO Dry Vacuum Truck
Cabin	HOWO TX, optional color and painting
Driving	LHD / RHD, 8x4
Engine	Germany MAN technology WD615.47 diesel engine, 371HP and emission can be 9726cc
Tranmission	HW19710 10 shift manual type, 10F & 2R
Wheelbase	1800+4600+1350 mm
Tire	12.00R20, 12+1 units

 

Capacity	24cbm
Tanker Material	Q355 material, thickness 6mm / 8mm Round shape with steel hoop Tilting angle ≤ 45° Maximum inner tanker pressure -0.078Mpa
Vacuum Pump	Roots Pump Suction rate: 30-80Tons/h Maximum Working Pressure: -0.06Mpa Pipeline Diameter: 150mm Air Exhaust Capacity: 20mg/m3
Exhaust Pipe	Air Compressor Equipment with maximum working pressure 0.2Mpa, with flow rate ≥ 15m3/min
Rear Stabilizer	Rear mounted bidirectional hydraulic lock, model SOH10B-1AL, flow rate 40L/min, working pressure 32MPa
Painting	100% customized painting and logos

 

✦ Product Introduction of HOWO Dry Vacuum Truck « « « 

Manufacturer: CEEC Trucks Group

Features:

1. Truck Chassis: SINOTRUK HOWO TX truck chassis, LHD, 8X4 model optional

                              HOWO MAN WD615.47 diesel engine 371HP, optional can be 371HP.

2. Tanker Body Kit: Full welding round shape, Q355 steel, thickness for body 6-8mm
                                 Efficiently Tanker volume 24000Liters, equal to 24cbm

3. Day Vacuum Pump: Famous Roots Vacuum Pump, efficiently suction speed 30-80tons/h

                                      Maximum working pressure -0.06Mpa, exhaust air capacity 21mg/m3

4. Specialized Equipment: Rear mmounted stabilizers for safety support for discharge

                                             Air compressor equipment with efficiently working, remaining material rate less than 2‰

HOWO 24cbm industrial dry vacuum truck supersucker roots pump vehicle

 

HOWO 24cbm supersucker dry hydro and air excavation combo truck

 

✦ Product Parameter of ISUZU sewage vacuum jetting truck « « « 

  

Vehicle configuration parameters		Note
Vehicle model	CEEC5310GXY6ACC
Batch announcement	375
Overall vehicle dimensions: length × width × height (mm)	11990×2550×3990
Chassis configuration parameters
Chassis model	SINOTRUK HOWO TX
Engine Power (hp/kW)	371/273
Engine model	WD615.47	Germany MAN technology
Drive type	8x4
Turning Diameter (Maximum on the Outside)	26 m
Tires	12.00R20 wire tires / 13 sets (including spare tire)
Wheelbase (mm)	1800+4600+1350
Allowable gross chassis weight (kg)	31000
Curb Weight of the Vehicle (kg)	19500
Tank configuration parameters
Total tank volume (m3)	24
Header type	Spinning and forming
Maximum lift angle of the tank body	45°
Maximum Operating Negative Pressure (mPa) inside the tank	－0.078
Feeding system configuration parameters
Vacuum pump	Roots style
Drive method	Independent vehicle-mounted power take-off
Feeding method	Negative pressure suction
Maximum Operating Negative Pressure (MPa)	－0.06	Optional imported pump can reach -0.09
Feeding speed (t/h)	30～80	According to the nature of the material and the actual silo material On-site debugging to achieve optimal speed
Suction pipe inner diameter (mm)	150
Dust filtration method	Gravity inertial dust removal and bag filtration
Filter bag cleaning method	Counter-blow
Exhaust dust content (mg/m3)	20
Discharge system configuration parameters
Air source equipment	Air compressor or ground external air source
Air compressor	Oil-free swing lever
Material discharge method	1. Pressure Delivery 2. In emergencies, open the back cover to lift and overturn
Maximum Operating Pressure (mPa)	0.2	(Ground air source flow ≥ 15m3/min)

 

Pressure discharge speed (t/h)	30~80 (discharge height when no external air source is available). up to 23 meters, reference material is cement)	According to the nature of the material and the actual silo material On-site debugging to achieve optimal speed
Discharge pipe inner diameter (mm)	100
Rear cover opening method	Manual side opening cover
The back cover opens to its maximum angle	70th
Rear cover locking method	Bolt locking
Remaining material rate inside the tank	2‰
Hydraulic lifting system configuration parameters
System Pressure (MPa)	16
Hydraulic oil tank volume (L)	～80
Raise the oil tank	Jiaheng/Haiwo
Other configuration parameters
Suction valve	Valve DN200 interface DN150
Discharge valve	Valve DN125, interface DN100
Other valves	DN50~DN200
Wear-resistant components	We use specialized manufacturing processes for bending and straight pipes (Installation and discharge pipeline elbows)

 

✦ Advanced Features for ISUZU 4x2 13cbm Sewage Jetting Truck« « «

 

The Dry Vacuum Truck is also named as Industrial Vacuum Truck, Supersucker Vacuum Loader Truck, Wet & Dry Vacuum Cleaner Truck, which used for the in-plant transfer of powdery materials such as steelmaking, ironmaking, sintering, coking, smelting deslag removal, desulfurization, dephosphorization agents, blast furnace and converter dust.
 
Newly designed multiple functional HOWO dry vacuum truck combines the principles of negative pressure pneumatic conveying and positive pressure pneumatic conveying, integrating negative pressure suction, transportation, and positive pressure discharge functions. The entire suction, transportation and discharge process is carried out under full closed conditions, based on the Roots Vacuum Pump, which can efficiently preventing dust leakage. The principle is to utilize the airflow generated by negative pressure to carry the collected powder material, which can be collected in the main material tank after gravity settling, cyclone filtration, bag filtration, and microfiltration. And HOWO Supervac Dry Vacuum Trucks are Widely used in Caribbean, Middle American and South American countries, including Honduras, Belize, Salvador, Nicaragua, Guyana, Surinam, Peru, Haiti, Dominica, St Martin, Trinidad and Tobago, etc.

 

 

 ⇒ Multiple Function

 

Dry vacuum trucks for international transportation of materials such as iron smelting, coking, coal and multiple powder materials, which shall be dry and pollution-carrying. And the full sealed vacuum tanker body kit can carry powder safety and efficiently avoid second pollution during delivery.

 

 ⇒ Efficiently usage

 

When dry vacuum trucks arrived destination, activate the truck pressure discharge system, the powder materials in the vehicles loading tank are discharged and pushed into the receiving silo through the receiving system. Whole process of material suction, transportation and discharge are all carried out under sealed conditions, efficiently avoid dust flying and no second pollution.

 

 ⇒ HOWO dry vacuum truck with Roots Pump

 

Industrial dry vacuum truck equipped with Roots Vacuum Pump, with efficiently flow rate 30-80tons/h. When roots pump is working, which creat negative pressure within the tank through gas conversionm the vacuum level is high and suction power is stronger, then can have powder material sucked into tanker. Also the equipped filter device can efficiently filtration all powder material.

 

• 

  Back view of dry vacuum truck
• 

  Vacuum system with Roots Pump
• 

  Rear view of dry vacuum tanker kit

• 

  Integrated control box for safety usage
• 

  Hydraulic control valve CE Standard
• 

  Rear stabilizer for safety discharge

 

✦ HOWO Dry Vacuum Truck with Roots Pump « « «

HOWO dry vacuum supersucker truck equipped with roots vacuum pump, which can guarantee truck with efficiently function of multiple fuction:

Negative pressure: Create negative pressure inside tank to suck multiple powder material into tanker through rear part, also equipped with filters for filaration before enter tanker.

 

Position pressure: Creat positive pressure inside tank to make inner higher pressure, then multiple powder can be discharged into any position as request.

 

HOWO super wet and dry vacuum truck applications: Suction, transportation, and discharge of various dusty powder materials, used for various dusty and powdery materials generated in production, such as sintering, coking, smelting desilication, desulfurization, dephosphorization agents, blast furnace and converter dust, lime powder, slag, coking powder, etc. The truck mounted with a fully enclosed and environmentally friendly bulk material collection and transportation device. Utilizing a multi-stage filtration system, 99.9% of subfine particles and larger particles are separated. The filtered air is discharged from the silencer exhaust port, achieving U-class emission standards, emission concentration ≤25mg/m³, fully meeting environmental requirements. And the main heart is Roots Vacuum Pump, with details as below showing:

 

Roots Vacuum Pump

 

Brand	Roots Vacuum Pump
Model	DRZ
Power	55KW
Year	2026
Max. Pressure	-0.06Mpa
Suction Speed	30-80 Tons/h

 

 

 

 

Below showing multiple Pump Assembly for different function