HOWO TX 8x4 heavy fire foam truck

This HOWO 8x4 TX foam fire truck is a heavy duty fire fighting vehicle, built on the reliable HOWO TX heavy chassis with comfortable double cabin. Powered by a 400Ps WP12 diesel engine and equipped with a CB10/80 fire pump and PL8/48 fire monitor, it features an 8000L water tank plus a 2000L foam tank to deliver powerful fire suppression performance. Designed for robust all-terrain operation, it comes with full English control panel, British standard pipe fittings and complete standard accessories, ready for rapid response to fire emergencies.

✅ HOWO TX chassis, outstanding urban passability

✅ 400HP Euro 2 Weichai power, rapid emergency response

✅ Heavy duty aluminum upper body, long service life

✅ 8000L water tank+2000L foam tank design

✅ High flow auto priming fire pump + 55m 360° rotating fire monitor

✅ 6 person air-conditioned double cab for full fire crew

✅ Full LED warning & working lighting system

✅ Complete rescue tools included, ladders & floodlights optional

-----Tanker material: Carbon steel, stainless steel, aluminum alloy, PP material

-----Fire Pump: Based on tanker body and jetting distance, optional American Darley brand

-----Optional: Pipeline, hose reel, aluminium ladder, Joint model (Chinese, European, American type)

✦Ⅰ.Product Parameter For HOWO Fire Water Truck «««

✦Ⅱ.Fire Pump System Of HOWO Fire Water Truck «««

This is the true "heart" of the fire truck. The entire system consists of: engine → transmission → PTO (Power Take-Off) → driveshaft → CB10/40 XZ fire pump. The engine not only drives the vehicle but also diverts power via the PTO to specifically power the fire pump, pressurizing and outputting water for firefighting. Simultaneously, the HOWO light fire truck can also mix foam media for emergency rescue in special fire situations.

1.Power Matching Verification: The output speed of the PTO (Power Take-Off) must match the rated speed of the CB10/40 XZ pump.The power margin should be reserved to avoid insufficient power and the pump failing to reach its rated pressure under full load.

2.Driveshaft Coaxial Alignment: The three driveshafts (gearbox PTO, PTO fire pump) must be coaxial. Misalignment will cause vibration, rapidly wear down the driveshaft bearings and the pump's mechanical seal, leading to leaks and abnormal noises.

3.Sealing Surface Installation Specifications: Clean the old gaskets and impurities from the PTO-gearbox mating surfaces and the pump body flange surfaces. Apply sealant evenly and use brand-new sealing paper gaskets. Do not reuse old gaskets to prevent air intake and oil leakage.

4.Piping Layout: Keep the suction pipe as short as possible with minimal bends. Excessive bends in the pipe will increase suction resistance and directly reduce water intake capacity. All flange connections must be equipped with complete rubber sealing rings.

5.Electrical wiring: The circuits of the double piston priming device, pressure switch, and residual water switch must be reliably grounded. The residual water switch function must be properly connected and dry-run protection must be provided to prevent the pump from running dry and burning the seals.

✅The foam proportioning device mixes foam concentrate with water at a preset ratio. Using the pressure differential principle, it draws foam liquid from the foam tank and blends it evenly into the water stream. The mixed foam solution is then delivered to the fire pump and fire monitor for fire suppression.

Around The Pump Proportioner
Model	PH64
Mixing ratio	6%
Operating pressure range	0.6-1.4 MPa
Flow rate range	16-64 L/S
Applicable foam types	B

✦Ⅲ.Advantage Of HOWO Fire Water Truck «««

✅ Reliable Heavy Duty Chassis & Strong Power System:

♦ Adopts mature HOWO TX 8×4 chassis, excellent off-road and load bearing capacity, adapts to complex site road conditions.

♦ WP12S400E201 diesel engine, 400 power, peak torque 1800N·m, max speed up to 95km/h, fast emergency response.

♦ HW 10 speed transmission, stable power output,12.00R20 heavy duty tires with 1 spare tire, durable for harsh working environments.

♦ Double cabin with 5 seats, can carry up to 5 firefighters in the independent cabin.

♦ Cabin equipped with air conditioning, electric windows and USB ports, improves crew comfort during long shifts.

✅Outstanding Fire Suppression Performance:

♦ Large dual tank capacity: 8000L water tank + 2000L foam tank, supports long duration continuous fire fighting.

♦ Equipped with top-brand CB10/80 fire pump: flow rate 80L/s, stable water supply.

♦ Fitted with PL8/48 fire monitor: working pressure 1.0MPa, flow 48L/s, water jet distance ≥65m. 360° horizontal rotation, pitch angle from -45° to 70°, flexible multi-angle fire attack.

♦ Complete pump inlet & outlet ports: 1×100mm inlet, 2×65mm outlets + 2×85mm outlets, can connect multiple hoses for simultaneous operation.

♦ Foam proportioning device: mixes foam concentrate and water at preset ratio automatically, quickly forms foam solution for liquid fuel fire suppression.