HOWO TX heavy 340HP fire water engine

Built on the reliable HOWO 4×2 chassis, this HOWO light duty fire fighting truck is a high efficiency and durable emergency rescue vehicle independently developed by CEEC Trucks Group. It is equipped with a 340HP turbocharged diesel engine and 10 speed transmission, supporting a maximum speed of 95km/h to realize rapid emergency response.

Fitted with a standard 4000L water tank (stainless steel optional), CB10/60 professional fire pump and 360° rotating fire cannon, it delivers a 40L/s large flow rate, 1.3-2.5MPa working pressure and 55 meter long shooting range, with a 7m suction height, realizing powerful and efficient fire extinguishing. The vehicle adopts high-strength steel frame and aluminum alloy superstructure for solid stability, matched with complete warning siren, full LED lighting system and full set of standard firefighting tools. With a 2+4 person cabin and flexible operation, it is perfectly suitable for urban, industrial park and township fire rescue scenarios, being a cost-effective and reliable fire fighting equipment for various fire protection emergency tasks.

✅ Compact HOWO TX chassis, outstanding urban passability

✅ 340HP Euro 3 Weichai power, rapid emergency response

✅ Lightweight aluminum upper body, long service life

✅ 4000L water tank design

✅ High flow auto priming fire pump + 55m 360° rotating fire monitor

✅ 6 person air-conditioned double cab for full fire crew

✅ Full LED warning & working lighting system

✅ Complete rescue tools included, ladders & floodlights optional

-----Tanker material: Carbon steel, stainless steel, aluminum alloy, PP material

-----Fire Pump: Based on tanker body and jetting distance, optional American Darley brand

-----Optional: Pipeline, hose reel, aluminium ladder, Joint model (Chinese, European, American type)

✦Ⅰ.Product Parameter For HOWO Fire Water Truck «««

✦Ⅱ.Fire Pump System Of HOWO Fire Water Truck «««

This is the true "heart" of the fire truck. The entire system consists of: engine → transmission → PTO (Power Take-Off) → driveshaft → CB10/40 XZ fire pump. The engine not only drives the vehicle but also diverts power via the PTO to specifically power the fire pump, pressurizing and outputting water for firefighting. Simultaneously, the HOWO light fire truck can also mix foam media for emergency rescue in special fire situations.

1.Power Matching Verification: The output speed of the PTO (Power Take-Off) must match the rated speed of the CB10/40 XZ pump.The power margin should be reserved to avoid insufficient power and the pump failing to reach its rated pressure under full load.

2.Driveshaft Coaxial Alignment: The three driveshafts (gearbox PTO, PTO fire pump) must be coaxial. Misalignment will cause vibration, rapidly wear down the driveshaft bearings and the pump's mechanical seal, leading to leaks and abnormal noises.

3.Sealing Surface Installation Specifications: Clean the old gaskets and impurities from the PTO-gearbox mating surfaces and the pump body flange surfaces. Apply sealant evenly and use brand-new sealing paper gaskets. Do not reuse old gaskets to prevent air intake and oil leakage.

4.Piping Layout: Keep the suction pipe as short as possible with minimal bends. Excessive bends in the pipe will increase suction resistance and directly reduce water intake capacity. All flange connections must be equipped with complete rubber sealing rings.

5.Electrical wiring: The circuits of the double piston priming device, pressure switch, and residual water switch must be reliably grounded. The residual water switch function must be properly connected and dry-run protection must be provided to prevent the pump from running dry and burning the seals.

✅After installation: Perform a sealing pressure test, a no-load test run, and a complete water priming test to confirm that there is no air leakage or seepage before putting it into use.

✦Ⅲ.Advantage Of HOWO Fire Water Truck «««

✅ Dependable HOWO Chassis for Fast Emergency Deployment:

Chassis: Mature HOWO 4×2 left-hand drive chassis

Power: 340HP WP.10.340E32 turbo diesel engine, 10-speed gearbox

Mobility: Max speed 95km/h, quick arrival at emergency sites

Crew cabin: 2+4 seating capacity, transports full fire team to scene

Application: Suitable for factories, communities and township fire rescue

✅High-performance Fire Fighting Superstructure:

Water tank: 4000L capacity, carbon steel (stainless steel optional)

Fire pump & cannon: CB10/60 pump, 60L/s flow, 55m jet range, 360° rotating fire monitor, 7m suction height

Body construction: Aluminum alloy welded superstructure & high-strength subframe

Auxiliary systems: Full warning siren, complete LED lighting, standard firefighting rescue tools