Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck
Isuzu GIGA 45m manlift hydraulic platform truck

Isuzu FTR 45m aerial work platform truck

The ISUZU FTR 45m aerial platform is a professional engineering special truck that integrates excellent technical performance and safety design. Based on the ISUZU New GIGA FTR chassis, the truck is equipped with a 4HK1-TC60 engine with a maximum output power of 205 horsepower and a total vehicle mass of 18,000 kg. The Isuzu FTR aerial platform truck has a maximum working height of 45 meters, a platform height of 27 meters above the ground, a maximum working radius of 7 meters, and a hydraulic static balance system to ensure stability. 

  • Lead Time:

    80 days
  • Work capacity:

    45m
  • Truck model:

    CEEC5183GXZ
  • Engine power:

    205HP
  • Engine type:

    Isuzu 4HK1-TC60
  • Axle drive:

    4x2,LHD
  • Gear box:

    MLD 6-shift gearbox,manual
  • Remarks:

    7-section fourteen-sided synchronous telescopic arm

The ISUZU FTR 45m aerial platform is a professional engineering special truck that integrates excellent technical performance and safety design. Based on the ISUZU New GIGA FTR chassis, the truck is equipped with a 4HK1-TC60 engine with a maximum output power of 205 horsepower and a total vehicle mass of 18,000 kg. The Isuzu FTR aerial platform truck has a maximum working height of 45 meters, a platform height of 27 meters above the ground, a maximum working radius of 7 meters, and a hydraulic static balance system to ensure stability.

Its unique H-type hydraulic outrigger design has a horizontal and vertical expansion distance of 8,600 mm and is equipped with a two-way hydraulic locking mechanism to ensure stability during operation. The truck is also equipped with a dual operating system of manual and wireless remote control, a platform rated load of 200 kg, 360° hydraulic rotation, and built-in multiple safety protection devices, such as automatic out-of-bounds limit, emergency stop device and leakage protection.

ISUZU FTR 45m aerial platform truck

● China best Isuzu aerial work platform truck factory
● More than 30 years professional manufacturer experience
● Be designed according to your requirements
● Professional sales team which will help you to choose suitable truck
● We can offer your a good after-sell service

 

Specification:

 

ISUZU FTR 45m aerial platform truck

 

 

Isuzu FTR 45m aerial platform truck

Vehicle model

PST5183GKZ

Overall dimensions (mm)

9800×2600×3820

GVW (kg)

18000

Operational height (m)

45

Curb weight(kg)

8600

Max. Speed (km/h)

95

Chassis Description

Chassis Brand

ISUZU GIGA FTR chassis

Cab

Single cab with A/C

Allowable person in cab

3

Wheel base (mm)

4500

Front/Rear overhang (mm)

1110/2475

Number of axles

2

Axle

Front axle (kg)

7500

Rear axle (kg)

13000

Traction system

4*2

Operation control system

Power steering

Braking system

Air brake

Transmission

MLD 6-speed

Tire specification

295/80R22.5 18PR

Tire quantity

6+1

Engine Description

Engine manufacture

ISUZU Engines

Engine model

4HK1-TC60

Emission standard

Euro 6

Exhaust/output

5190 ml/ 151 kw

Horse power

205HP

Upper Body Description

Max. working height (m)

45

Height of platform above ground (m)

27

Max. working radius (m)

7

Working pressure (Mpa)

16

Control type

1. Manual operation in two positions

2. Wireless remote operation

Type

Insulating type

Rated loading (kg)

200

Adjusting balance mode

Hydrostatic Leveling System

Safety belt

1 set

Rotation Angle

360° Hydraulic

Boom Amplitude Time

160 ≤ t ≤ 180

Boom Telescopic Time

140 ≤ t ≤ 160

Boom Rotation Time

160 ≤ t ≤ 180

Hydraulic leg span

Horizontal(mm)

8600

Vertical(mm)

8600

Hydraulic leg retraction time (s)

100 ≤ t ≤ 120

Type

H type

Quantity

4 PCS

Adjustment

Adjusted separately or interconnected

Hydraulic lock

Two-way hydraulic lock for four legs

Strobe light on rear landing legs

Two yellow lights

Main structure

Material

High quality carbon steel and profiles, with slip-proof decorative steel plates

Tool box

Mould stamping door with stainless steel door lock

Fencing

Stainless steel tube

Steps

With steps on drivers’ side

Guard railing

High quality cold bending carbon steel profile; High strength

Wheel casing

Injection mold molding, beautiful, high strength

Rotary table

Supporting Boom

Low alloy steel plate welding

Slewing bearing

Single row of four - point contact ball belt outer teeth

Reduction gears

Planetary gear type

Motor

Axial piston motor

Security configuration

Automatic interlock device for get on and off

Prevent the risk of misoperation

Hand-operated emergency pump

When the engine and the main pump failure, through the emergency system to send the worker back to the ground and the vehicle back to the running state

Emergency stop device for working platform

Used for emergency stop operation and restricted boom operation

Automatically limit work range

When the working range reaches the specified value, the dangerous direction is automatically restricted.

Leakage protection device

Equipped with leakage protector to ensure the safety of power supply and power tools

 

Best Manufactoring Standard:

ISUZU FTR 45m aerial platform truck

1. Core structure design and mechanical properties

Multi-stage boom system designThe variable-section truss telescopic boom structure is adopted, and the stress distribution needs to be optimized through finite element analysis. The 45-meter boom needs to meet the deflection deformation control within 0.5°, and the synchronous telescopic mechanism needs to achieve millimeter-level error control. The supporting double-cylinder interlocking hydraulic system prevents asymmetric extension.

Anti-overturning stability calculationThe outrigger span needs to be more than 1.5 times the width of the vehicle, equipped with a three-level hydraulic interlocking device, and based on the dynamic stability algorithm of the EN280 standard, the safety factor under the maximum working load (≥300kg) needs to be considered ≥2.5.

Compound motion trajectory planningThe four-link leveling mechanism needs to achieve ±3° automatic compensation accuracy, and the path planning system needs to avoid the working restricted area and set up electronic fence protection. 

ISUZU FTR 45m aerial platform truck

2. Technical indicators of key subsystems

Hydraulic power systemUse load-sensitive proportional valve group, pressure fluctuation is controlled within ±0.5MPa, dual pump confluence system needs to meet 0-100% flow stepless adjustment, minimum starting pressure ≤1.2MPa.

Intelligent control systemThe CAN bus architecture needs to meet ASIL-B safety level, equipped with millimeter wave radar + visual fusion anti-collision system, detection distance ≥15 meters.

Emergency safety deviceThe response time of the dual redundant braking system is less than 100ms, the fall protection device needs to meet the EN12159 standard, and the stopping distance is less than 0.5 meters. 

ISUZU FTR 45m aerial platform truck

3. Advanced manufacturing process requirements

Welding process control: The arm welding adopts narrow gap submerged arc welding, and the weld flaw detection must meet the highest standard of ISO5817-B grade welds. The overall stress relief treatment after welding, the residual stress ≤15% of the material yield strength.

Assembly precision management:The arm section matching clearance is less than 0.05mm/m, the straightness error is less than 1/2000, and the slewing bearing assembly clearance is controlled in the range of 0.03-0.08mm.

Surface treatment process:The composite coating system (hot spray zinc + polyurethane) is salt spray resistant >2000h, the key friction pair surface is laser cladding treated, and the hardness reaches HRC58-62. 

ISUZU FTR 45m aerial platform truck

4. Comprehensive performance verification system

Type test standard:200,000 telescopic cycle tests (equivalent to 10 years of use), dynamic load test must pass 1.25 times rated load verification.

Environmental adaptability:verification -40℃ low temperature cold start test, continuous operation capability verification under 8-level wind load.

Intelligent function test:Automatic obstacle avoidance system false alarm rate <0.1%, remote diagnosis system response time <30s. 

 

ISUZU 6HK1 diesel engine, super powerful

 Expert for producing ISUZU Bucket Lift Truck over 10 years with good reputation

 High quality carbon steel material

 12 months free fast moving spare parts

 All English version control box, panel, and owner's manual, for easy understanding 

 Training service for ISUZU aerial work platform trucks

 

Isuzu GIGA 45m aerial platform truck

 

Isuzu GIGA 45m aerial platform truck

 

CEEC TRUCKS is a leading exporter of Aerial Platform trucks in China. We possess over 10-year export experience of high platform trucks. We can ensure the fast delivery time and 12 months guarantee for our sewage trucks. Our aerial platform trucks are sold to more than 80 countries including Eastern Europe and CIS countries, Africa, Southeast Asia, Central and South America, Middle East, etc.

 

---- Maximize save your sea freight.

---- Professional guidance on your importing documents.

---- Safety, Quickly, Timely

  

CEEC garbage compactor truck factory review

 

---- Service more than 60 countries.

----  Professional guidance on your importing documents.

----  CO, FORM E, FORM P, Pre-shipping Inspection...

 

 export documents
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

best ISUZU 18 M aerial platform trucks
ISUZU 18m Aerial Work Platform
ISUZU aerial work platform truck also named as hydraulic lifting platform truck, Japanese tech ISUZU...
ISUZU 16m Aerial Platform Truck - CEEC Trucks
ISUZU 16m Aerial Platform Truck
16m bucket crane lifting truck, ISUZU 100P 4x2 chassis, 5-shift manual gearbox, ISUZU 98HP diesel en...
ISUZU 16m Aerial Platform Man Lift Truck - CEEC Trucks
ISUZU 16m Aerial Platform Man Lift Truck
16m bucket crane lifting truck, ISUZU 600P 4x2 chassis, 5-shift manual gearbox, ISUZU 120HP diesel e...
ISUZU 20m Telescopic Boom Truck - CEEC Trucks
ISUZU 20m Telescopic Boom Truck
20m telescopic man lifting truck, ISUZU LHD 4x2 chassis, 5-shift manual gearbox, ISUZU 120HP diesel ...
ISUZU 16m Aerial Platform Working Truck - CEEC Trucks
ISUZU 16m Aerial Platform Working Truck
16m bucket crane lifting truck, ISUZU LHD 4x2 chassis,  MSB 5-shift manual gearbox, ISUZU 120HP...
ISUZU GIGA 16m Aerial Platform Working Truck - CEEC Trucks
ISUZU GIGA 16m Aerial Platform Working Truck
ISUZU 16m bucket crane lifting truck, ISUZU GIGA left hand drive 4x2 chassis, FAST 12-shift manual g...
ISUZU 18m Aerial Platform - CEEC Trucks
ISUZU 18m Aerial Platform
18m bucket crane lifting truck, ISUZU 700P LHD 4x2 chassis,  MLD 6-shift manual gearbox, ISUZU ...
ISUZU 14m Aerial Platform Working Truck - CEEC Trucks
ISUZU 14m Aerial Platform Working Truck
14m bucket crane lifting truck, ISUZU 600P LHD 4x2 chassis,  MSB 5-shift manual gearbox, ISUZU ...

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Looking for About
Contact us #
+86 13647297999

Home

Products

whatsApp

contact